Whether you're looking for dryer vent cleaning, dryer repair, or a brand new top-of-the-line clothes dryer, professional dryer services can help.

Dryers are a type of household appliance that are used to dry your clothes. But, they too can break down occasionally, leaving you with wet clothes and a lot of aggravation, as well as the need for dryer repair.

Luckily, many issues with dryers can be solved with some simple troubleshooting and a little elbow grease.

Common Problems with Dryers

Our list of dryer problems isn’t comprehensive, but it shows you the 5 most common.

The Dryer is Not Heating Up

One of the most common issues is a dryer not heating up.

There are many reasons this can happen, including:

• A faulty heating element
• A broken thermostat
• A malfunctioning thermal fuse

To diagnose this problem, refer below for a visual inspection of the heating element and thermostat. If you determine that one of these parts is faulty, then it must be replaced.

Another reason for a dryer not heating up could be a faulty thermal fuse. The thermal fuse is a safety device that shuts off power to the dryer if it overheats. When the fuse is bad, the dryer won’t heat or will not run altogether.

To determine if the thermal fuse is at fault, use a multimeter to test the fuse for continuity. If it isn’t continuous, it will need to be replaced.

Dryer Not Tumbling

If your dryer drum is not turning, it could be that your belt is broken or your motor is broken. First thing to do is unplug it and examine the belt for any wear or damage.

If the belt is broken, you’ll have to replace it. If the belt is still in good condition, then the issue may be related to your motor – if so, you will need to get it fixed by professional services.

The Dryer is Noisy

Your dryer may be rattling, squeaking, or otherwise making some less-than-appealing sounds for a number of reasons. These parts need replacing: parts that can break or wear down, and they may click or blow when you are using the dryer.

To remedy the issue, you will have to change out the damaged components. If you don’t know which part is malfunctioning, then you’ll need an expert to help.

The Dryer is Drying Too Slowly

If your dryer is not drying well, a clogged lint filter or vent could be to blame. Over time, lint buildup can reduce airflow, making the dryer work harder to dry clothes and increasing the time it takes to dry.

To prevent your clothes from snagging, start by cleaning the lint filter after every load, and get your dryer vent line professionally cleaned once a year.

And, it’s worth mentioning, clogged lint filters can cause fires in your home, so there’s more than one reason to keep things neat and tidy.

Dryer Will Not Start At All

If your dryer is not turning on at all, it could be a matter of power. Begin by inspecting the power cord and the outlet for damage or wear. If the problem persists, replace whichever appears more likely to be the problem. And as always, when working with electricity, proceed with caution.

If the power source is good, it may be a faulty thermal fuse or door switch. To check these, you can test for continuity using a multimeter.

Dryer Repair Tips

There are some common dryer problems that you might be able to solve yourself, and others might require a professional dryer repair service to help you get back up and running.

Check the Power Source

If your dryer won't start, the most likely causes are a lack of power, a defective door switch, a blown thermal fuse, or a bad start switch. Ensure the dryer is connected to power and that the power and the outlet function correctly. If the outlet is bad, you’ll have to replace it.

And again, be super cautious when dealing with electricity.

Clean the Lint Filter

As we’ve mentioned, a clogged lint filter restricts airflow and can make the dryer take much longer to dry a load of clothes. Do not allow this to happen and clean the lint filter after EVERY use.

Check the Drum Belt

If the drum in your dryer isn’t rotating, you may be faced with a bad belt. Inspect the belt for any wear or damage, and replace if necessary.

Inspect the Heating Element

If your dryer is not getting enough heat, examine the heating element and look for visible regions of damage or wear. If the heating element is defective, you’ll need to replace it.

Testing the Thermal Fuse

If your dryer is not getting hot, it’s probably a faulty thermal fuse. The thermal fuse can be tested using a multimeter for continuity. If it has no continuity, you’ll need to purchase a replacement.

Steps for Dryer Repair

If you’re handy with simple DIY repairs and have a general understanding of mechanics, checking and replacing worn parts can save you money on your broken dryer. These are some typical tools and devices used for dryer repairs:

• Collect the tools and materials you need:
  This may include a screwdriver, pliers, a multimeter, and parts like a heating element or thermal fuse.
• Shut off the power and unplug the dryer:
  Before you start dismantling your dryer, be sure to disconnect the power and remove your dryer from the wall. This is one of the more basic yet also best safety tips.
• Disassemble the dryer:
  Take the cover off your dryer to gain access to the internal workings. Depending on the design of your dryer, the access points to the components may differ.
• Find and fix the issue and change the defective dryer parts:
  Once you can get to the guts, diagnose the issue and change out any broken pieces. This may include replacing a broken belt, a malfunctioning thermal fuse, or a worn drum roller.
• Reassemble the dryer:
  After you repair the broken components, re-install the dryer, reversing the steps you took to disassemble the machine.
• Test the dryer to make sure it’s working OK:
  Then reassemble the dryer, plug it back in, and turn it on to see if it's operating correctly. You’re good to go if it’s all working!

When to Call a Professional

Some dryer issues may require only a DIY fix using simple repair techniques, and some don’t (if for any reason these simple repair tips do not solve the problem of your faulty dryer).

Here’s when to pick up the phone and call a pro:

• No Technical Knowledge or Experience:
  If you’re not comfortable with fundamental repairs or unfamiliar with the process, contact a professional. Attempting to fix your dryer yourself without appropriate experience and knowledge could cause even more damage, or worse, a deadly hazard.
• Safety Concerns:
  Dryers run on high-voltage electricity, and if things go wrong, you could face a dangerous electrical fire. If you are not comfortable working with electricity, call a professional.

Even if you know your way around electricity, safety should be your top priority when dealing with appliances.

• Complex or Major Problems:
  If your dryer has serious problems (like a malfunctioning motor or control board), it’s best to call a professional repair service. These issues require specialized tools and knowledge that most homeowners lack. Trying to repair it yourself may cause more damage or make the dryer unfixable.
• Time Constraints:
  If you do not have the time, tools, or skill necessary to fix your dryer, calling a professional is the best option.

Professionally performed dryer repair services can be quickly handled by experienced specialists, getting your appliance up and working with no downtime.

Your Dryer Deserves Repairs — Don’t Deprive It

Dryers are a vital part of everyday life, so when they don’t work properly, it can be a major inconvenience.

Luckily, these common problems and easy repairs are often all you need to keep your dryer healthy. You can decide if you feel confident making these basic repairs yourself by following the first steps in this article.

But if you aren’t handy or are dealing with a complicated problem, it’s probably best to call a professional dryer repair service. They have the expertise to ensure it’s done right and safely.

Your washing machine is one of the hardest-working appliances in your home — it’s constantly in use, wash after wash. Proper maintenance is essential for it to continue functioning effectively and to have a long lifespan.

The good news is that you don’t have to be an appliance expert to maintain your washing machine and prevent potential problems. With some easy do-it-yourself maintenance tips, you can help prolong the life of your investment and save yourself from expensive repairs. This guide will cover some crucial DIY washing machine maintenance tips.

Why Does Washing Machine Maintenance Matter?

But before we list out the maintenance tips, let’s understand why you need to maintain the washing machine. Here are several advantages of regular maintenance:

Extend Tool Life: Maintenance is the key to the long life of your washing machine, which will save you money in the long run.
Lower Repair Expenses: Maintenance calls can spot small problems before they become big ones, so you won't get hit with a large repair bill.
Increases Efficiency: A well-cared-for washer will be able to work most efficiently to save on energy and water expenses.
Enhances Cleaning Action: Placed and maintained properly, clean parts improve the effectiveness of your washing process.

Now onto the nitty-gritty of the hands-on DIY routine wash machine maintenance that’s going to keep those clothes going round and round.

Clean the Lint Filter

Dryers get a lot of love when it comes to lint filters, but washing machines have them, too. These filters are designed to catch lint, hair, and debris, which will help to prevent your drain from clogging. If you let the lint filter become clogged, however, it can lead to blockages and inefficient drainage that reduce your machine’s speed and effectiveness.

How to clean it:

• Find the Filter: Look in your washing machine’s manual to determine where the filter is. It is usually found near the top of the agitator or inside the drum’s rim.
• Shut Down the Machine: For safety, unplug the washing machine or disconnect the power.
• Remove Lint: Take out the lint or debris from the lint filter compartment. You may need a brush or moistened fingers to clean properly.
• Replace the Filter: Once cleaned, ensure the lint filter is resecured and close the compartment.

Check and Clean the Drain Pump Filter

A blocked drain pump filter may be to blame when your washing machine fails to drain water or spin. It is important to check and clean this filter regularly to avoid affecting the machine’s operation.

• Find the Filter: If your machine is not draining properly, check the drain pump filter. It is usually accessible behind a small door near the bottom of the machine.
• Disconnect the Machine: Never begin maintenance while the power is ON.
• Prepare a Vessel: Set a shallow container or towel under the filter, in case water spills during cleaning.
• Unlock the Filter Compartment: Gently open the filter compartment. Be ready for water to gush out — use your container or towel.
• Filter Cleaning: Take out the filter and wash it well. Look for debris, coins, or anything else, and rinse the filter under running water until clean.
• Reattach and Test: Place the filter back securely. Shut the compartment and test the machine to ensure proper drainage.

Check the Detergent Dispenser Thoroughly

Soap Residue, Mould & Mildew Build-Up: Soap residue, mould, and mildew may build up in the detergent dispenser over time. Regular cleaning avoids such problems and keeps your clothes smelling fresh.

• Take Out the Detergent Tray: Most washing machines have a removable tray. Pull it out carefully.
• Take Apart and Clean: If possible, disassemble the tray. Wash the compartments in warm, soapy water to remove buildup. Use a small brush or old toothbrush for hard-to-reach places.
• Rinse and Dry: Rinse thoroughly and let it air dry completely before reassembling.
• Wipe the Housing: Wipe the tray housing with a damp cloth. Make sure it's dry before reinserting the tray.

Inspect and Wipe the Door Gasket

The rubber door seal (gasket) on front-loading machines can accumulate slimy black mold and mildew. Check and clean it regularly.

• Check the Seal: Look for mold, mildew, debris, and cracks or splits.
• Clean the Seal: Wipe it with a damp cloth. Use a vinegar solution or washer cleaner if needed.
• Dry the Door Seal: Make sure it is fully dry. Keep the washer door open for airflow.
• Inspect for Cracks: Run your fingers along the seal to check for tears or damage. If severely worn, contact a technician for replacement.

Balance the Washing Machine

An unstable machine can cause vibrations, noise, and even damage.

• Unbalanced Load: Avoid overloading. Distribute laundry evenly in the drum.
• Level the Machine: Use a bubble level and adjust the feet as necessary.
• Check Loose Articles: Remove any foreign objects from inside or outside the drum.
• Use a Stabilizing Mat: It helps reduce vibrations and prevents the washer from moving.

Clean the Outside and Control Panel

Keeping the outside clean prevents dust and dirt from entering the machine's parts.

• De-energize Machine: Disconnect the power.
• Dust & Wipe: Use a dust cloth or microfiber towel to wipe the surface, buttons, and knobs.
• Clean the Drum Opening: Inspect and clean the area around the drum opening.
• Check for Rust or Paint Chipping: If you find any, touch up with appliance paint to prevent corrosion.
• Plug Back In: Once dry, reconnect the machine and power it on.

Maintain Proper Water Supply

Your washer’s performance depends on clean, steady water input.

• Examine Water Hoses: Look for cracks, leaks, or blisters. Replace defective hoses immediately.
• Clean Filters: If your washer has inlet filters, clean them regularly to prevent blockages.
• Avoid Overloading: Stick to the machine's weight limits.
• Use Quality Detergent: Use the right type and amount to prevent buildup and ensure proper flow.

Keep the Interior Clean

The inside of your washer also needs attention.

• Run a Cleaning Cycle: Use the cleaning cycle as per your machine’s manual.
• Use the Correct Detergent: Don’t overuse detergent to avoid residue buildup.
• Check for Mold on Drum & Agitator: Wipe down with water and vinegar or use machine cleaner if needed.
• Keep the Door Open: Let the drum air out after use to prevent mold growth.

Check for Loose Connections and Screws

Due to vibration, connections and screws can loosen.

• Check All Connections: Inspect water hoses, drain lines, and power cords for looseness or leaks.
• Tighten Screws: Use a screwdriver or wrench to tighten loose external components.

Deal With Weird Noises or Problems Immediately

Unusual sounds or poor performance could mean serious issues. Don’t ignore them.

• Loud Banging or Thumping: May indicate an unbalanced load or faulty suspension system.
• Too Much Vibration: Could be due to an unlevel surface or drum issues.
• Water Leaks: Any leakage should be fixed quickly to avoid damage.
• Drainage or Spinning Issues: Could signal clogs, pump failure, or a worn-out belt.

Can You Do It Yourself When It Comes to Washing Machine Repair?

Good DIY washing machine maintenance doesn’t require advanced skills — just consistency.

By using the above maintenance checklist, you’ll protect your washing machine, extend its life, and avoid costly repairs. Regular checks, cleaning, and small fixes go a long way.