Blog Detail

Home / Blog / What Can Cause a Refrigerator Not to Get Cold?

What Can Cause a Refrigerator Not to Get Cold? image
What Can Cause a Refrigerator Not to Get Cold?

A fridge that’s not working properly can lead to spoiled food. When it no longer cools, it can result in ruined products and waste of food. Tackling cooling problems in time is necessary to prevent further headaches and expensive repairs.

Here, we take a look at these culprits and list some simple steps that can help you effectively diagnose and learn how to fix a fridge not cooling, so you can get your fridge back to the optimal performance.

Top Causes of a Refrigerator Cooling Failure

There are a number of reasons a refrigerator stops cooling efficiently. Here are a few of them:

Local Appliance Techs are Recieving Calls Right Now

Broken Thermostat: If the thermostat is improperly set or broken, the fridge won’t be able to maintain a proper temperature.

Clogged Air Vents: Dirty or blocked vents hamper the proper cold air flow and may result in sporadic cooling.

Unclean Condenser Coils: These are coated with dust and dirt, making the fridge work longer unnecessarily lowering its cooling operation.

Bad Compressor: The compressor is the work horse of the fridge, circulating refrigerant throughout the system if it’s dead the fridge won’t cool.

Troubleshooting and Diagnosis

If your refrigerator is not cooling, check out these common things that could be causing the fridge to no longer be cold.

Inspect the Thermostat Presets On your thermostat, locate the FAN switch and set it to AUTO Turn the temperature down by 5 degrees If the furnace turns on with the fan set to AUTO, the thermostat is working fine If the furnace doesn't turn on with the fan set to AUTO, try setting the fan to ON If the fan doesn't turn on with the fan set to ON, the thermostat is faulty.

Easiest solution: Check the thermostat A common cause of cooling issues is an incorrect thermostat setting. Here’s what it takes to make sure the thermostat is set right:

Find the thermostat dial: It’s usually located inside the refrigerator compartment. If it’s higher than it should be, turn it to a cooler setting.

Be patient: You must wait to see if the solution works: after changing the thermostat, give the fridge some time for the temperature to even out at the new setting (about a couple of hours should do the trick). Its recommended range is 3-5°C for the fridge, -18°C for the freezer.

If a simple adjustment to the thermostat doesn’t help, the problem could be the thermostat itself — particularly if you’ve observed uneven temperature levels.

Inspecting Airflow and Vents

When the air vent is clogged, it may block cold air from flowing out, thereby resulting in the refrigerator not cooling effectively.

Check if anything’s getting in the way: Verify that the vents inside the fridge and freezer aren’t obstructed. Relocate big bottles and bulky things away from vents to allow for better airflow.

Check for frost buildup: If you see frost around the vents, there may be a problem with airflow, possibly due to a defective defrost system. Thaw the freezer out fully and see if that works.

Cleaning the Condenser Coils

Dusty condenser coils can also impede cooling by causing the refrigerator to have to work harder to shed heat.

Find the condenser coils: Typically they are in the rear or underneath the refrigerator. If necessary, unplug the refrigerator and pull it away from the wall.

Clean the coils: Dust, pet hair and debris can collect on the coils; gently remove anything that's gumming 'em up with a soft brush or vacuum attachment. For optimal performance, clean the coils every six months, or sooner if you have pets.

Checking the Door Seals

Warm air infiltrating the refrigerator can lead to cooling problems and compromised door seals are often to blame.

Now You Call A Local Appliance Tech

Look at the seals for cracks and wear: Examine the rubber seals trailing the doors and the edges of the doors themselves to see if there’s any damage or wear on the gaskets.

Test the seal: Shut the door on a piece of paper or dollar bill. If it lifts out easily, the seal might need to be cleaned or replaced to keep the cold air inside.

Preventive Measures

It’s important to provide some preventative maintenance to your refrigerator in order to keep it running smoothly.

Regularly clean the condenser coils: This makes sure the refrigerator runs efficiently and doesn’t overwork the cooling system.

Create space for air: Don’t pack the fridge and freezer too full and leave space for air to move so circulation remains steady.

Inspect door seals: In order to keep cool inside, consumers need to make sure they’re keeping hot air out. If gaskets are damaged or loose, replace them to ensure warm air isn't able to enter.

Defrost the freezer: If your freezer collects frost, it’s important to defrost the freezer periodically to prevent a blocked airflow.

When to See a Doctor

If all of these troubleshooting methods still don’t fix the cooling problem, then it’s probably time to get someone out. Seek professional care if:

The compressor went bad: A failed compressor part can be a complicated and expensive fix. A tech can diagnose and repair it safely.

Electrical troubles occur: Wiring or the control board malfunction and such issues need expert knowledge, as you should not try to perform DIY fix due to the risk involved.

Conclusion

When your refrigerator isn’t working properly, you may rush to do some research on Google, to look for a solution, believing that something unforeseen has happened and you’ll need to call a technician for help, unless you consider yourself an expert. Although there are a lot of reasons for an AC not working, the correct thermostat setting, unobstructed air flow, and clean condenser coils are few prerequisite for best cooling performance. When in doubt, feel free to consult a mental health professional. Taking care of your refrigerator will help ensure that it keeps your food safe and fresh, and that your household runs smoothly.