Blog Detail

Home / Blog / Why is My Dryer Squeaking?

Why is My Dryer Squeaking? image
Why is My Dryer Squeaking?

A squeaking dryer is more common than a toking dryer. And although it could be a red flag for something that’s really wrong with the machine, there are a few steps you can take to potentially sleuth out the issue and fix it yourself—before calling in a technician.

The squeaking noise might start off faint, then gradually get louder each time you run the machine. While it can be annoying, it’s also often an early sign that something inside the dryer is wearing out or has become loose. Fortunately, with a bit of investigation and a few tools, you may be able to identify and fix the issue yourself.

Continue reading the following suggestions to figure out what might be causing the noise and what steps you might be able to take to try to fix it.

Tools and Equipment

Every project begins by pulling together the tools and supplies that you will need. This one is no different. In order to inspect, open, and potentially repair a squeaky dryer, you’ll want to gather the right tools first.

Keep in mind that the tools you need may vary depending on your specific dryer model and the problem at hand. Here are some general tools commonly needed:

  • A Philips-head screwdriver – used to remove the back panel of the dryer.
  • Clamps and a pair of pliers – helpful for loosening or removing small parts, particularly around the motor area.
  • Crescent wrench – needed for disassembling metal parts or loosening bolts.
  • Spackle knife – used to gently pry open the dryer lid without causing damage to the surface.
 

Dryer Squeaking: What to Know Before You Make a Service Call

Before you spend money on a service call, there are a few common causes of dryer squeaking that you can check yourself.

  • Leveling Issue
    One common reason for dryer squeaking is that the dryer isn’t level. If the feet of the dryer aren’t properly adjusted, the machine may vibrate unevenly, which can cause a high-pitched noise. Make sure all four feet are firmly on the ground and that the dryer is level front to back and side to side.
  • Lint Buildup
    Another possible issue is lint buildup inside the machine. When lint accumulates around the motor or internal components, it can cause friction, overheating, and ultimately squeaking. You may need to remove the back panel to clean it out properly—or call a professional if you're not comfortable doing so.
  • Worn Parts
    Old, worn-out parts such as the belt and pulleys can also be the culprit. When belts become loose or pulleys start to burn or deteriorate, squeaky sounds are inevitable. Replacing these parts is often a straightforward process and can silence the noise.

Factors Which Can Cause a Dryer Squeaking

There are several components inside a dryer that may cause squeaking. Even if the dryer itself seems to be running normally, one worn-out part can still produce an irritating sound.

Below are the most common parts you should check:

Dryer Belt

The dryer belt wraps around the drum and is responsible for spinning it. If the belt is loose, cracked, or slipping, it can create a squeaking or squealing noise.

How to check the dryer belt:

  • Remove the dryer lid using a spackle knife.
  • Visually inspect the belt wrapped around the drum.
  • If it appears loose or damaged, you’ll need to replace it.

How to replace the belt:

  1. Loosen the mounting screws.
  2. Unhook the wires holding the old belt in place.
  3. Remove the worn belt.
  4. Slide the new belt onto the wires and secure it with the mounting screws.
  5. Make sure the new belt is snug around the drum.

Glide Bearings

Glide bearings are small plastic or fabric tabs that sit at the edge of the dryer drum. Their purpose is to help the drum spin smoothly without banging into the sides.

When glide bearings wear out or fall off, the drum may rub against the dryer cabinet, causing squeaking or thumping.

How to replace glide bearings:

  • Separate the tabs from the lip of the drum.
  • In some dryer models, you may need to lower or slide the drum to access the bearings.
  • Once the drum is accessible, remove the old bearings using pliers.
  • Install new glide bearings as per the manual instructions.

Idler Pulley

The idler pulley maintains tension on the dryer belt and allows it to rotate smoothly. If the pulley becomes loose, worn, or misaligned, it may squeak or squeal as the drum spins.

How to check and fix the idler pulley:

  • Try spinning the pulley wheel by hand. If it resists movement or produces noise, it likely needs replacement.
  • Check if the pulley screw is loose. If so, tighten it back into the bracket.
  • Replace the pulley if it appears cracked or if noise continues even after adjustments.

4 Steps to Determine the Reason for a Dryer Squeaking

To diagnose a squeaky dryer, you can follow a simple four-step process. Always consult your dryer’s manual for model-specific guidance.

Step 1: Unplug the Dryer
Safety first! Before you begin any work, unplug the dryer from the wall outlet. This prevents electrical shock. Wearing rubber work gloves is also a good precaution.

Step 2: Move the Dryer to an Open Area
Carefully slide the dryer away from the wall to give yourself plenty of working space. You’ll need this room to lift the lid, remove panels, and possibly tilt the drum or reach behind the machine.

 

Step 3: Take Out the Lint Trap and Lid
To gain better access to the internal components:

  • Insert a spackle knife under the dryer lid to lift it up.
  • Use the spackle knife again to press the two clips securing the lid, then gently pry it open.
  • Once the lid is open, use a screwdriver to remove the lint trap housing for full access.

Step 4: Check for Damaged or Missing Parts
With the dryer open and unplugged, visually inspect the belt, pulleys, bearings, and motor. Look for anything worn, loose, or broken. Identifying and replacing the faulty component may be enough to eliminate the squeak entirely.